The UK DIN Rail Terminal Blocks is a very common terminal. The UK DIN Rail Terminal Blocks is used to facilitate the connection of the wire. It is actually a piece of metal sealed inside the insulating plastic. There are holes at both ends to insert the wire, and screws are used for fastening or Loosen, such as two wires, sometimes need to be connected, and sometimes need to be disconnected, this can be connected with terminals, and can be disconnected at any time without having to solder or entangle them, it is convenient and quick. Moreover, it is suitable for a large number of wire interconnections. In the power industry, there are special terminal blocks, terminal boxes, all of which are terminal blocks, single layer, double layer, current, voltage, ordinary, breakable and so on. A certain crimp area is required to ensure reliable contact and to ensure sufficient current is passed.
The UK series Din Rail Terminal Block types are divided into: 1. general purpose; 2. universal grounding type; 3. general experimental type; 4. double wiring type; 5. double layer wiring type; 6. fuse terminal.
Common UK terminal types: UK1.5N, UK2.5B, UK3N, UK5N, UK6N, UK10N, UK16N, UK35B, UK35N, UKH50, UK95, UK150.
The comfort of use of the combination terminals depends to a large extent on the accessories of the terminals. For the UK range, all relevant wiring requirements can be achieved in a way that saves both storage space and ease of operation. The stampings, screws and small sleeves of the bridge are made of a special copper alloy that has been tinned or nickel plated. The internationally recognized screw connection meets the most stringent requirements and covers a wide area of application. For the most stringent requirements: the screw connection has also proven itself in the wiring of large conductor cross section. At least 70% of the current rating of the terminal's rated current can flow through all of the bridges. For specific current value, please refer to the technical parameter description of each bridge in the sample.
The JUK series Screw Connection Din Rail Terminal Block has the typical features which are decisive for practical applications.
- Made from engineering flame retardants nylon PA66 with brass screw metal.
- With universal foot which can be installed on Din Rail NS 35.
- It can connect two conductors with ease, even large conductor cross sections are not a problem.
- Electric potential distribution can use fixed bridges in the terminal center or insertion bridges in the clamping space.
- All types of accessories: End cover, End Stopper, Partition plate, marker trip, fixed bridge, insertion bridge, etc.
