DIN Rail Earthing Terminal Block

JUSLKG 35 DIN Rail Earthing Insulation Terminal Blocks Connector

1. DESCRIPTION:

The internationally recognized screw connection meets the most stringent requirements and covers a wide area of application. For the most stringent requirements: the screw connection has also proven itself in the wiring of large conductor cross sections.In this type of Terminal Block we're gonna have a conductor coming in this side and another conductor leaving this side like with the nut It's simply going to allow electricity to pass through. This no way to disconnect power or to protect anything on either side of this terminal block . This is the most commonly used type of terminal block. Usually used to distribute power within a control panel. Also can be used for signal connections. The next type of terminal block that you'll see commonly is a ground terminal block obviously looks very different as far as color goes from  the single level pass-through. But in shape and form very much . The  same the major difference with a ground terminal block is it will ground connections .

Made from engineering flaming resistant nylon PA66 with brass conductor.

With universal foot which can be installed on Din Rail NS 35.

It can connect two conductors with ease, even large conductor cross sections are not a problem.

Electric potential distribution can use fixed bridges in the terminal center or insertion bridges in the clamping space.

Ground terminal blocks: With a single click. Simply snap onto the DIN rail to create the PE connection.

All types of accessories: End cover, End Stopper, Partition plate,Separating plate, Marker strip, Fixed bridge, Insertion bridge, etc.

Technical Parameters