Multi Level DIN Rail Terminal Blocks

JST 2.5-3L There Layer Spring Terminal Blocks Multi levels

In some special subject, they will need  three-layer terminal blocks, but only have Spring Terminal Block and screw Terminal Block now. They are similar in electrical performance and installation, the wiring method is different. It offers high wiring density, which is especially important when switchgear space is restricted. In addition, Compared with the three-layer terminal DIKD1.5, the three-layer spring terminal ST2.5-3L is much better than the screw  terminal. The ST2.5-3L uses a single outer casing. There are no additional accessories, and a end cover is required after installation.

The three-level spring-cage terminal block has three feed-through levels in a 5 mm wide terminal housing.

With one bridge shaft on each level, this modular terminal block can be used as a compact potential distributor or as a sensor terminal, for example.

• Can be labeled on every level
• Due to the different level ,so can quickly work
• Save space
• 3-Level all can use spring clamp connections

Technical Parameters