Screw Clamp Terminal Block

JUK 10N 10mm screw clamp DIN Rail terminal blocks

The Din rail Terminal Block is used to facilitate the connection of the wire. It is actually a piece of metal sealed in insulating plastic. There are holes at both ends to insert the wire, and there are screws for fastening or loosening, such as two wires, Sometimes it needs to be connected, and sometimes it needs to be disconnected. In this case, you can connect them with terminals, and you can disconnect them at any time, without having to weld them or entangle them, which is very convenient and fast. And suitable for a large number of wire interconnections, there are special terminal blocks and terminal boxes in the power industry, all of which are terminal blocks, single-layer, double-layer, current, voltage, ordinary, breakable and so on. A certain crimping area is to ensure reliable contact and to ensure that sufficient current can pass.

• The JUK universal screw terminal block series has the typical features which are decisive for practical applications.
• Made from engineering flaming resistant nylon PA66 with brass conductor.
• With universal foot which can be installed on Din Rail NS 35.
• It can connect two conductors with ease, even large conductor cross sections are not a problem.
• All types of accessories: End cover, End Stopper, Partition plate,Separating plate, Marker strip, Fixed bridge, Insertion bridge, etc.

Technical Parameters